When purchasing lawn mower blades you need to choose the best quality. This will ensure that the blade lasts and will also help your mower run more efficiently.

The best choice is stainless steel. material for blades since it is strong and durable. They also don’t rust easily and give off an attractive appearance to your lawn.

Straight Blades

The blades that are included with your lawnmowers are most likely to be straight. These blades work well for side discharges and bagging, but they are not suitable for mulching because of the lack of lift. If you’re interested in using a blade that can do both, consider buying a high-lift blade. They feature a curved rear edge that raises the clippings and work best in areas with high or thick grass.

The blade’s upper-facing side is adorned with small ridges, or wings that create an air vacuum that lift grass and create a precise cut. This type of blade is efficient on damp or dry surfaces, but is more efficient in cutting grass that is thicker.

High-Lift Blades

High-lift blades can be distinguished by the upward curve that is visible at either end. They produce a powerful airflow that pushes trimmings into the side bag or chute. They also give a better cutting for your lawn, and can help you cut through thick grass.

This is because the blades generate more suction and airflow. This could be a drawback for those who have soil that is sandy because the dirt they lift can rapidly deteriorate and cause premature wear.

The blades differ from other replacement blades in that they do not require you to take off the deck of the mower. Instead, you simply need to raise the deck of your mower to reach bolts to secure the old blade. If you replace the mower blade, be careful when handling the sharp edge. After you have removed the old blade, screw in the new one and check it for proper fit. Then you’re ready to go back to work.

Multi-Purpose Blades

They are multi-functional and can be used to bag, shred or even side discharge your grass clippings. They generate a lot of airflow and suction, and can help cut grass into small pieces that can easily be placed in the soil to be used for nutrients.

However, this type of lawn mower blade isn’t suitable for mowing sandy terrains. The reason is that the airflow can pull sand, dust and other debris in the blade. This could lead to the blade wearing more quickly.

Check the blades original to them that came with the pusher or tractor. Find the specifications like the length of the blade and the size of the center hole. Then, compare them with the specifications of the blades you wish to buy. This way, you can make sure that the new blades fit your irresistible mower blade sharpener and work effectively. You may also want to look at the size of the blade. The thinner blades are typically associated with longer life but this will depend on how often you utilize your mower and how thick the metal is.

Mulching Blades

For lawns that need clippings to be mulched a mower blade designed with a more dramatic upturn on its back side assists in the process. These blades provide greater lift, which pushes the grass toward the deck and down the chute for discharge. They also aid in improving the cut of thicker grasses. They could require more power from your engine and could result in more fuel.

A high-lift blade is equipped with a wider “wind wings” on the back side to boost the flow of air. This can reduce dust and suction. These blades are great for riding mowers as they give a uniform and smooth cut.

A mulching knife installation must be done first to ensure that it’s compatible with your mower. Install a wood block between the mounting bracket and the blade in order to prevent it from benting as you tighten the bolt. Then, you can put it on the blade with a ratchet as well as the washers included with the kit.

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.