To keep your lawn in top condition You will have to change the blades on your lawn mower from time to time. The replacement of the blades is a fairly simple task that requires only several steps and basic tools.
The most durable lawn mower blades will have solid lawn mower blades sharpener construction materials that will help ensure they last longer without becoming rusted easily. They must also be able to withstand massive amounts of force.
Deck Blade
The primary component of a lawnmower is the cutting blade. It is encased in the deck’s casing and is available in various shapes, sizes and designs. Each has particular specifications and must be able to withstand the high-speed impact of grass as well as other items.
The standard blades are curved and can lift grass with a scissor-like motion. The blade’s curve also aids in spreading the clippings. This type of blade requires less power than a high-lift blade, so it’s ideal for mowing on dusty or sandy terrain.
The reel blades or cylinders are made up of 3-7 helical shaped blades that are welded into a rotating cylinder reel. They’re used on reel or gas-powered mowers. These are the most common kind of mower blades, and are also simple to replace. Many hardware or lawn care stores will make the blades more balanced and sharper at a low cost.
Standard Blade
The most common type of blade on lawn mowers is the flat blade. It is made to cut grass but has no specific features, such as bagging or mulching features. It has a minimal suction and can be used with all kinds of grass.
The blades of high-lift blades are bent in a way that maximizes airflow. This creates vertical suction that draws the grass towards the deck of the mower. It creates a perfectly defined look for your lawn. These blades can also be used to mowing on sandy surfaces.
When using the lawn mower blades, make sure the shear pin holes are aligned correctly with the center bolt hole of the mower. If not, the blade won’t sit on the boss of the blade in a proper way. The blade could wear out faster than you expect. To make sure that the shear pins are placed correctly, it is recommended to check your mower’s manual or parts catalog for the exact location of the holes.
Lifting Blade
These blades are able to recirculate air, reducing the amount of clogging within the mower deck, while still delivering a high-quality cut. The blades are curved inward to create a vacuum which lifts grass and then delivers it into your bagging system or to the side discharge.
The lifting action of these blades can also improve the quality of cuts when it is used on a longer grass, where a lower lift blade might struggle to get an uniform cut. They are also ideal for those who like mulching their lawn clippings. They can be used with either an a 3-in-1 or 2-in-1 mower blade.
The only drawback to these blades is that they need an engine that is stronger to avoid straining the motor. These blades are not suitable for use on dusty or sandy surfaces in which grit, sand and other debris could make the deck degrade faster.
Mulching Blade
The blade is a popular alternative for those who do not make use of bags. It allows clippings from your mower to be discharged through the discharge chute. It has bigger “wind wings” that are larger than the ones found on standard lawn mower blades, these blades can create an efficient airflow under the grass clippings to ensure they don’t get kicked into the air and can be safely discharged out of your mower.
To ensure that your lawn mower’s mulching blade has been installed correctly, inspect its bevel (the slope of the edge of the blade that is responsible for cutting) to ensure it is pointing downwards to the ground while mowing. If it isn’t the sharp end of the blade could damage the deck of your mower. Be sure to ensure that the blade is not bent to an odd angle. This could result in it not working when cutting taller grass. This is typically a sign of an injury to the blade.
Leave a Reply