You want the best quality when you buy lawn mower blades. This will help to make sure that the blade will last and helps the mower to run more efficiently.
Stainless steel is the best material for blades because it’s robust. They also don’t get rusty and provide an attractive appearance to your dynamic lawn mower blades sharpeners.
Straight Blades
If you’re a homeowner with the standard lawn mower, the initial blades it came with are likely to be straight. They are great for side discharges and bagging, but they are not suitable for mulching because of their low lift. If you’re interested in using one that does both, think about buying the high-lift blade. They feature a curved edge which helps to lift the clippings. These blades are more effective with thick or tall grass.
The blade’s side facing upwards has tiny raised ridges or wings that create an air vacuum to raise the grass to make an exact cut. This blade design is useful on damp or dry surfaces, however it’s more efficient at cutting thicker grass.
High-Lift Blades
They are easily identifiable by their distinct upward curve at either end The high-lift blades produce strong airflow that pushes clips into bags or the side chute. These blades offer an easier cut and can be used to avoid clumping of high grass.
The blades of these mowers require more power from your lawnmowers to run because they create a lot of suction and airflow. This can be a disadvantage when you live in a sandy area, as the dust they carry can quickly degrade and cause premature wear.
These blades are different from other replacement blades because you do not need to remove the deck of the mower. Instead, you need to raise the mower deck in order to access the bolts that hold the old blade. Be aware of the blade’s sharp edge when replacing it. Replace the blade following removal of the old one. Check it out for the right fit. After that, you’ll be ready to get back to working.
Multi-Purpose Blades
These blades can be multi-functional. They can be utilized to shred, bag and side discharge your grass clippings. These blades generate suction and flow and assist in cutting grass into tiny pieces that can be spread out on the soil, providing nutrients.
However, this type of lawn mower blade is not suitable for mowing sandy terrains. The reason is that the airflow can pull dust, sand and other debris in the blade. This can result in the blade wearing out faster.
The best way to find the appropriate lawn mower blades for your lawn mower is to check the original blades that came with your lawn tractor. Look for specs like the length of the blade as well as the size of the center hole. Compare them to the specifications of the blades that you would like to buy. You will be able to ensure that the new blades you purchase will perform well and will fit on the mower. Take note of the blade’s thickness. The blade’s thickness is important. However, this will be determined by the length of time you use your lawnmowers and the thickness it is.
Mulching Blades
For lawns that require clippings to be mulched, an edged mower with a more dramatic upturn at its back edge helps with the process. The blades have more lift that can propel the grass towards the deck and out of the chute for discharge. They also aid in the cutting of thicker grasses. They may require more power from your engine and could result in more fuel.
The rear of a high lift blade is adorned with broader “wind wings” to improve the flow of air over the clippings which helps reduce suction and the amount of dust that’s emitted. They’re ideal for lawn mowers that ride as they give a smoother, more uniform cut.
The installation of a mulching blade must be done first to ensure it is compatible with your mower. Then, put a wood block in between the blade and the mounting bracket to keep it from twisting while you tighten the nut. Once you have the ratchet that comes with the kit and washers, you can attach the blade.
Leave a Reply