You’ll want the highest quality when you buy lawn mower blades. This will ensure that the blade will last and also helps your mower run more efficiently.
The best blades are constructed from stainless steel since it’s tough. They are also resistant to rust and look great on your lawn.
Straight Blades
If you’re a homeowner using the standard lawn mower, the initial blades that came with it are likely to be straight. They are great for bagging and side discharging but they aren’t great for mulching since they’re not able to provide much lift. If you’re looking to get one that does both, think about buying the high-lift blade. They feature a curved rear edge that lifts clippings, and they function better in conditions with tall or thick grass.
The blade’s upward-facing side has small raised ridges or wings which create an air vacuum that raise the grass to make a precise cut. This blade design is efficient on damp or dry surfaces, but is more efficient at cutting thicker grass.
High-Lift Blades
High-lift blades can be identified by the upward curve at the ends. They generate an airflow that carries clippings to the side bag or chute. These blades provide an easier cut and are able to avoid clumping of the tall Acclaimed Grass Mower Blade Sharpeners.
The reason is that the blades generate greater suction and flow. If you live in sandy soil, the dirt they release will swiftly deteriorate your lawnmower and result in premature wear.
In contrast to other replacement mower blades, you don’t need remove your mower deck in order to replace the blades. It is possible to access the bolts that hold the old blade by lifting the deck of the mower. If you replace the mower blade, make sure you are careful when dealing with sharp edges. After removing the old blade, screw into the new blade and test it to ensure that it is in the right place. After that, you’ll be ready to get back to working.
Multi-Purpose Blades
These blades are multi-functional and can be employed to bag, cut or even side discharge grass clippings. The blades create suction and airflow and can aid in cutting the grass into small particles that are easily spread on the soil in order to supply nutrients.
However, this type of blade for lawn mowers is unsuitable for mowing on sandy terrains. The high volume of airflow can pull dirt and sand into the blade. This may cause the blade to wear out faster.
Make sure to check the original blades that were included with the pusher or tractor. Find the specifications like the length of the blade and the dimensions of the central hole. After that, you can compare them with the specifications of the blades you want to buy. You can then be sure that the blades you buy work well and fit your mower. Be aware of the blade’s size. Thicker blades are usually linked to longer lasting, although this depends on how frequently you utilize your mower and how thick the material is.
Mulching Blades
A mower blade with a dramatic upward turn at the back edge is ideal for lawns where clippings must be mulched. These blades provide greater lift to push the grass toward the deck and out of the chute for discharge. They also aid in the cutting process of more dense grasses. But, they will need more power from your engine, which could be costly in fuel.
The rear of a high-lift blade has a wider “wind wings” to increase airflow over the clippings, which can reduce suction as well as the amount of dust that is released. They’re great for lawn mowers that ride as they offer a smoother, more uniform cut.
To install a mulching blade first, ensure that it is compatible with the specifications of the mower. After that, you can place a wooden block in between the blade and the mounting bracket to keep it from turning while you tighten the nut. Then, you can put it on the blade using a ratchet and the washers supplied in the kit.
Leave a Reply