You’re looking for the top quality when purchasing lawn mower blades. This will guarantee the long-lasting durability of the blade and help your mower work more efficiently.
The best blades are made from stainless steel since it’s durable. The blades do not wear out and can give an attractive appearance to your lawn.
Straight Blades
The blades that are included with the standard lawnmowers are most likely to be straight. These blades are ideal to bag and side discharge but not for mulching as they don’t provide much lift. If you’re looking to get a blade that can do both, consider buying the high-lift blade. These have a curved back edge that raises the clippings and work better when you have high or thick grass.
The blade’s side facing upwards has small raised ridges or wings that create an air vacuum to raise the grass to make an accurate cut. This type of blade can be used on wet and dry surfaces but is better at cutting thicker grass than regular lawn mower blades.
High-Lift Blades
High-lift blades can be distinguished through the curve that is upward at the ends. They create strong airflow, which pushes trimmings into the side chute or bag. They provide an improved cutting and can be utilized to prevent clumping of the tall grass.
This is because the blades generate more suction and airflow. If you live in sandy soil, the dust that they generate will quickly wear down your lawnmowers and result in premature wear.
These blades are different from other replacement blades in that you do not need to take off the deck of the mower. It is possible to access the bolts holding the old blade by lifting the deck of the mower. If you replace the mower’s blade, make sure you are cautious when working with the sharp edge. After removing the old blade, you can screw into the new one and then test it to ensure that it is in the right place. Then, you’ll be able to go back to working.
Multi-Purpose Blades
These blades can perform all-in-one for Practical Lawn Mower Blade Sharpener mowers, allowing you to mulch, bag or even side discharge grass clippings. The blades create suction and airflow, and aid in cutting the grass into small particles which can be easily spread over the soil to provide nutrients.
However, this type of blade for lawn mowers is unsuitable for mowing on sandy terrains. The reason for this is that the airflow pulls sand, dust and other debris in the blade. This can result in the blade wearing out faster.
Make sure to check the original blades that came with the pusher or tractor. Look for specs like the length of the blade, as well as the size of the center hole. Compare the specs of blades you’re considering purchasing with those on the blades. This will help you make sure that the new blades will fit your mower and work properly. It is also important to think about the thickness of the blade. The blade’s thickness is important. But, it will depend on the amount of time you are using your lawnmowers, and also how thick it is.
Mulching Blades
A mower blade with a dramatic upward turn at the back edge is great for lawns where clippings need to be mulched. These blades provide greater lift to push the grass toward the deck, and then out of the chute that discharges it. These blades also improve the cutting of thicker grasses. They may require more power from your engine, which could cost you additional fuel.
A high-lift blade has a wider “wind wings” at the back of the blade to boost airflow. This reduces dust and suction. They’re ideal for lawn mowers that ride as they offer a smoother, more uniform cut.
Installing a mulching knife must be done first to ensure that it’s compatible with your mower. Install a wood block between the bracket for mounting the blade and the blade to stop it from breaking as you tighten the bolt. After that, you can fix the blade using a ratchet and the washers supplied with the kit.
Leave a Reply