The right mower blades can be a valuable instrument for lawn maintenance However, the wrong blades can cause damage to your mower or create a safety hazard. This guide will help you find the right blades to use on your lawn.
Standard blades are designed to rapidly cut dense grass and take it to the bagging process. They also mulch well.
They cut grass
Regular blades are easy to operate and cut grass into tiny fragments. The grass fragments can be returned to the soil, in which case they can be used to enrich the soil. They are also less susceptible to dust gathering over other blades.
Blades with a low lift are ideal for sand as they need less power. This blade type doesn’t blow dust out into the air, so it lasts longer.
These blades are more suction-driven than other blades. They are able to process grass clippings into smaller pieces which can later be disposed of or bagged. They can be utilized by lawn care firms who receive different inquiries from customers on how to manage grass clippings. The versatility of these blades is an advantage, but they are not as durable like carbide blades or steel. The blades could require more care, like cleaning, balancing and sharpening.
They Mulch
A standard lawn mower blade generates a powerful suction over the land that pulls up grass to be cut precisely. However, that suction also soaks up dust and moves it across the deck, which could result in rapid wear and tear to the mower.
A high lift blade however is able to suck up optimum grass mower blades sharpeners and pushes it forward for easy disposal into the bag or the side discharge chute. These blades are typically curved and have additional cutting surfaces on the edges to help in mulching.
The most effective results can be achieved by choosing the right blade for your lawnmower. If you wish to be certain that the blade you choose is the right one you should check the code or part number on the blade. This should match the list of parts in the user manual. Make sure that the center hole pattern on the new blade matches to the one included with your unit. Once you’re satisfied that the blade fits correctly then attach it with the washer and nuts included.
They lift grass
If the mower is in motion along the bigger edges of high-lift blades collect an air pocket. The air cushion is created that decreases friction and cuts and produces a more consistent cut. It also sucks up the clippings and pushes them into the side discharge chute or a grass bag for simple disposal.
They are perfect to cut grasses with dense growth that tend to clump. They are ideal for lawns that are dry or wet However, they won’t work well when mowing dusty or sandy surfaces because they may collect dirt and throw it and stones into the air.
Be sure to use proper safety precautions in the process of changing the lawn mower’s blade. You’ll need to park your mower on a level surface. take off the key from the ignition, and then raise the deck of the mower to access the blade. You can unscrew the bolts which hold the blade in place and then install a new one.
They discharge grass
High-lift blades are characterized by their large edges which create an air pocket as they go through the grass. This reduces friction and resistance. The suction created by blades lifts up the grass clippings, launching them into a side discharge chute for easy disposal.
Low-lift blades are better suited to mowing soils that are sandy, because they lack the suction to raise grass up. They are also more prone to the damage caused by stones and other debris that enter the mower while cutting.
All-purpose blades, or 2-in-1 standard blades can be commonly found on regular lawn mowers, as well as those equipped with bags on the rear. These blades feature a tiny curve along the edge that helps to reduce clumping and improve the dispersal of grass clippings on your lawn. They have a moderate air flow, which could put a strain on the engine and reduce your ability to control clipping distribution.
Leave a Reply