Lawn mower blades wear down and must be replaced occasionally to ensure your lawn is looking at its best. Replacing blades is an easy project that only takes a few steps and some basic tools.

The best lawnmowers blades are made from durable materials. This helps them last for a long period without getting rusty. Blades should be strong enough to withstand high forces.

Deck Blade

The main part of a lawnmower’s cutting blade. It is encased in a casing called a deck and comes in a variety of sizes, shapes and designs. Each one has particular specifications and it must be able to handle fast contact with grass and other things.

Standard blades feature a curved surface that lifts grass and cuts it in an asymmetrical scissor motion. The blade’s curve also aids in spreading the clippings. This type of blade requires less power than a high lift blade, which makes it ideal for mowing on dusty or sandy terrain.

Cylinder blades, also known as reel blades, consist of helical blades welded in a cylindrical rotating reel. They’re typically used on reels and gas-powered mowers. They’re the most popular kind of mower blades, and are also simple to replace. Many hardware or lawn care stores can make the blades more balanced and sharper for a minimal fee.

Standard Blade

A normal blade is a flat kind of blade for lawn mowers that the majority of people install on their lawnmowers. It is designed to cut grass, however it does not have no specific features, such as mulching or bagging capabilities. It provides minimal suction and is suitable for any kind of grass.

High-lift blades are angled at their edges which permit maximum airflow. This causes vertical suction which brings the grass to the mower deck. This creates the perfect defined appearance to your lawn. They are also great for mowing on sandy terrains.

When using these lawn mower blades make sure that the holes for the shear pins are aligned correctly with the hole in the center of the mower. Otherwise, the blade won’t rest on the boss correctly. The blade can be worn out more quickly than you expect. To make sure that the shear pins are positioned correctly, it is recommended to refer to the mower’s manual or parts list to determine the exact location of the holes.

Lifting Blade

These blades are able to recirculate air, reducing the amount of clogging within the mower deck, while still delivering a high-quality cut. The blades are curved upwards creating a vacuum that raises the grass and delivers it to your bagging system or side discharge.

The lifting effect of these blades can also improve the quality of the cut when it is used on a longer grass which is where a less lift blade could struggle to create an even cut. They are also ideal for those who like to mulch their lawn clippings and are compatible with the 2-in-1 or 3-in-1 blade.

These blades are only a downside if you own a Effective lawn mower blade sharpener mower that has an engine that is strong. They’re not recommended for areas with dusty or sandy surfaces where sand and grit can be kicked up and deteriorate the mower deck faster.

Mulching Blade

This blade is a very popular alternative for those who don’t utilize a bagger. It allows clippings from your mower to be discharged into the discharge chute. These blades have larger “wind wings” and are much larger than those on lawn mowers that are regular. They can provide better airflow under the grass clippings. They are then safe to be discharged by your mower.

To ensure your lawn mower’s mulching blade is installed correctly, check its bevel (the slope on the blade’s edge that’s responsible for cutting) to make sure it is pointed downwards towards the ground when you are mowing. The sharp edge of the blade can scratch your mower deck if it is not properly installed. Make sure the blade isn’t bent at an unnatural angle. It could be unusable to cut higher grass. This is typically the sign of a broken blade.

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.